High strength reliable quality hoist remote control wireless single speed with 10 function switch
| Transmitter Function | 10 single speed buttons |
| Transmitted power | ≤10dBm |
| Size | 14.0*8.5*4.0cm |
| Transmitter Weight | 300g (without batteries) |
| Transmitting frequency | VHF: 310-331MHz / UHF:425-446MHz |
| Frequency range optional | 50-60 HZ |
| Controlling distance | ≥100m/can be customized 250m/500m |
| Direction of movement | Up, down, East, South, West, North |
| Button life | ≥ 1 million times |
| Material | Industrial reinforced nylon plastics |
| Transmitter power supply | DC 3V (2A++battery can be used for 4 months) |
| Receiver power supply | DC12V/24V or AC 36V/220V/380V |
| Temperature range | -20℃~+75℃ |
| Enclosure protection class | IP65 |
| Application | Industrial radio wireless remote controls are widely applied for lifting equipment, construction machinery, cargo loading/unloading machines, water supply system, data transmission, theiron-smelting and steel-making, the automobile manufacturing, paper-making and chemical industry, steel structure processing, galvanization, shipbuilding, railroad, bridge, tunnel construction and other equipment and sites which can be worked by radio controls. |
Small red mini handheld - welding robot wireless remote control
Up and down and advance of the welding torch, the use of the dial type push button, self-reset mode, each corresponding to 2 control signal output, point mode control; Running, stop, up, down, left, right, P, W, clockwise, reverse, are all point-motion mode control, and each button corresponds to one control signal output at the receiver. In addition, the fault light, button and indicator light on P and W are lit through feedback, and the data interface from the receiver side is connected with the data interface controlled by the device side to upload information in real time and light the indicator in real time. This model welding robot wireless remote control, the overall two-way mode, the transmitter end is small, can be held by a single hand, its own start and emergency stop button, the receiver end is equipped with an external extension antenna, can be built in fixed, signal can be provided according to the need to open 100 meters or 250 meters or 500 meters;
1. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.
2. Strong and stable signals.
3. Up/Down, East/West, South/North can be set to suppress each other.
♦ More Smaller & More lighter
Default configuration
1. Transmitter * 1 piece
2. Receivers * 1 piece
3. The receiver comes with 1m cable connector
4. Operation and Maintenance Manual
Attentions
1. Due to transportation requirements, the product is not equipped with battery.
2. When you order, please remark the voltage, DC12V/24V or AC220V/380V.
Warranty & Service
1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
